S7/S8/N8 Unlock
SAMSUNG S7 / S7 EDGE - G930A / G930P / G930T / G930U / G935A / G935P / G935T / G935U ( MUST BE ON STOCK FIRMARE 7.0 / 8.0 - NO COMBINATION OR 6.0)
SAMSUNG S7 ACTIVE - G891A ( MUST BE ON STOCK FIRMARE 7.0 / 8.0 - NO COMBINATION OR 6.0)
SAMSUNG S8  - G950U / G950U1 / G950W (CANADIAN - SPRINT - ATT - VERIZON - TMOBILE - XFINITY)
SAMSUNG S8 ACTIVE - G892A / G892U ( ATT - SPR - TMB)
SAMSUNG S8 PLUS  - G955U / G955U1 / G955W  (CANADIAN - SPRINT - ATT - VERIZON - TMOBILE - XFINITY)
SAMSUNG NOTE 8  - N950U / N950U1 / N950W (CANADIAN - SPRINT - ATT - VERIZON - TMOBILE - XFINITY)

1. MUST CHECK ORIGINAL IMEI IS NOT WIPED. NOT RESPONSIBLE IF DONT CHECK. BEST WAY *#0011# AND GET A PICTURE FROM THE CLIENTS. ALSO MAKE SURE MIPI TEST IS PASS.

2. CLICK TM/SPR UNLOCK TAB. 
   CLICK PORT DROP DOWN BOX AND SELECT CORRECT MODEM PORT
   CLICK ADB DEVICE DROP DOWN BOX AND SELECT CORRECT DEVICE. (IF DOESNT SHOW OR ANY ERROR CLICK RESTART ADB SERVER, WAIT 10 SECONDS AND THEN RETRY)

3.  SELECT CORRECT MODEL AND PRESS READ SEC BOX.
   ** IF DOING DIRECT ON CLIENT PC UNCHECK THE REMOTE BOX FOR FASTER READ
   THE PHONE WILL REBOOT 2 TIMES AND THEN EXE WILL GIVE YOU A POP-UP BOX.
   DO-NOT CLICK OK, WAIT UNTIL THE PHONE IS IN UPLOAD MODE AND CONNECTED TO YOUR PC AND DRIVERS INSTALLED. CHECK DEVICE MANAGER AND MODEM PORT WILL SHOW UP.
   ** IF DOING DIRECT ON PC WITH THE REMOTE BUTTON UNCHECKED, YOU WONT GET ANY POPUP AND JUST WAIT TILL PHONE BOOTS TO UPLOAD MODE AND EXE RECOGNIZES THE PHONE AND READS THE SECURITY.
   ** IF FOR ANY REASON DOES NOT DETECT OR GET ANY ERROR, MAKE SURE ALL OTHER ADB PROGRAMS ARE CLOSED, NO SCREEN LOCK OR PASSWORD ON PHONE AND CHANGE USB CABLE / PORT ON PC AND RETRY.
   

4. CLICK OK AND EXE WILL START READ THE SECURITY. THIS CAN TAKE 1-6 MIN SO BE PATIENT. DO NOT CONNECT ANY OTHER PHONE DURING THIS DURATION.


5. ONCE SECURITY DATA IS READ, PHONE WILL REBOOT FROM UPLOAD MODE AND THEN REBOOT ONCE MORE.
   THE JOB WILL BE CREATED IN REPAIR TAB AS "SECUNLOCK"
   ** IF READ SECURITY FAILS AS NOT FOUND FLASH COMBO MODEM FROM LINNKS BELOW AND THEN RETRY.

6. CLICK WRITE SEC TO COMPLETE THE UNLOCK. (ONLY DO IF STEPS 1-6 ARE DONE CORRECTLY, OTHERWISE WILL RESULT IN IMEI LOSS)
   ** MAKE SURE RESET MLS(WRITE SEC) BOX IS CLICKED.

7. IF COMBO MODEM WAS FLASH, JUST WRITE STOCK MODEM BACK TO THE PHONE AND ENJOY!!

ALL UNLOCKS ARE INSTANT ONCE THE READ SECURITY STEP IS DONE.

*** IF FOR ANY REASON PHONE DOES NOT PICK UP SERVICE OR LOW SIGNAL OR 2G/3G NOT WORKING, USE THE LINK BELOW TO DOWNLOAD THE QCN FOR YOUR MODEL.
WRITE QCN TO THE PHONE USING ANY TOOL. ( OCTOPUS BOX WORKS THE BEST) 
AFTER QCN WRITE IS COMPELTED, UNCHECK THE RESET MSL(WRITE SEC) BOX AND WRITE SECURITY AGAIN. 
QCN FOLDER LINK:  https://www.amazon.com/clouddrive/share/UBRm9XeeD8gtl2Wirb7AzYOvINfPHyawAmIL9xjUgvq


*******IF READ SECURTIY FAILS JUST FLASH COMBINATION MODEM FROM THE LINKS BELOW AND RETRY:
   MAKE SURE FLASH CORRECT BIT VERSION WITH CORRECT MATCHING BIT MODEM OR WILL RESULT IN ERRORS
   G950U / G950U1 / G950W :  https://www.amazon.com/clouddrive/share/6jA3dgV1lNgVWP8WTvPRUnWk33ozUjEATCN85DZfKmX
   G892A / G892U  :  https://www.amazon.com/clouddrive/share/2FLUvnXZ3rs60HYGaw6dFrwJZpS4XqZu2JFP610WOHS
   G955U / G955U1 / G955W :  https://www.amazon.com/clouddrive/share/f6R285nMp3hyU2O7DluOc5xpt2Id6KGWzlEulTOJ7tM
   N950U / N950U1 / N950W : https://www.amazon.com/clouddrive/share/i6CmKNYJWAxA4ROoVwm67wgQ4jHOi9V92HEdpSynd91
   ** IF PHONE IS ON COMBINATION FIRMWARE NO MODEM FLASH REQUIRED