IMEI REPAIR GUIDE
IMEI RANGE FOR SUBMISSION:
IMEI REPAIR RANGE 1: 35722407xxxxxxxxx 
IMEI REPAIR RANGE 2: 35843007xxxxxxxxx
IMEI REPAIR RANGE 3: 35617407xxxxxxxxx
IMEI REPAIR RANGE 4: 35445907xxxxxxxxx

WHAT IS IMEI RANGE?
RANGE IS TEMPORARY IMEI A USER MUST INPUT IN THE IMEI FIELD FOR SUBMISSION PURPOSES
IT IS TEMPORARY THE FINAL IMEI IS CREATED BY SERVER
*** ALWAYS KEEP RECORDS OF THE TEMPORARY IMEI YOU SUBMIT.

RANGE EXAMPLE: 35722407xxxxxxxxx  ---> 357224074541546


DEBUG LEVEL HIGH:
THIS IS REQUIRED TO COMPLETE THE REPAIR ON STOCK FIRMWARE OR EVEN COMBINATION MOST CASES
MANUAL STEPS :
PRESS *#9900# �> CHOOSE �DEBUG LEVEL ENABLED� �> CLICK �HIGH� AND PHONE WILL RESTART AND DONE  
OR 
IF DOING VIA CMD SEND THIS COMMAND:
adb shell reboot debug0x4948



QUALCOM INSTRUCTIONS:

ALL ANDROID OREO (8.0 / 8.1) AND ANDROID NOUGAT (7.0 / 7.1.1)  IS NOW SUPPORTED ON STOCK FIRMWARE:


NOTE 9 / S9 / S9+ STEPS EXYNOS OR QUALCOM ONLY: (G960U / G960W / G960U1 / G9600 / G960F / G965U / G965U1 / G965W / G9650 / G965F / N960U / N960U1 / N9600 / N960D / N960FD / N960W)
 
1. CLICK ON RESTART ADB SERVER BOX. WAIT 5-10 SECONDS AND THEN IN PORT DROP DOWN BOX SELECT CORRECT MODEM PORT. IN ADB DEVICE DROP DOWN BOX SELECT CORRECT ADB SN DEVICE
2. CLICK MSL UNLOCK TAB
3. SELECT NEW AT RIL
4. PRESS READ INFO. THE PHONE WILL REBOOT ONCE AND READ THE INFO . IF DONE CORRECTLY ALL INFORMATION ABOUT THE PHONE SHOULD APPEAR : MODEL# / UID / MSLADDRESS / MSLID / KEY ID / CPID ( IF ALL THESE DO NOT SHOW THAT MEANS NOT DONE CORRECTLY REDO AGAIN)
5. CLICK REPAIR TAB, SELECT CORRECT MODEL #. (MAKE SURE CORRECT MODEL IS SELECTED IF SELECT WRONG MODEL WRONG DATA WILL BE CREATED AND NO REFUND FOR THIS)
6. SELECT NEW AT RIL ONLY. DO NOT SELECT "SKIP UNLOCK(TMB, SPRINT)" BOX
7. IN THE IMEI FIELD ENTER A RANDOM IMEI CREATED FROM THE RANGE MENTIONED ABOVE AND CLICK REPAIR. (DO NOT CLICK ANY OTHER BOX)
**  IF PHONE IS DUAL SIM MUST ENTER DIFFERENT RANDOM IMEI FOR IMEI1 AND IMEI2. DUAL SIM CONSUMES EXTRA CREDITS
*** ALWAYS KEEP RECORDS OF THE TEMPORARY IMEI YOU SUBMIT.

8. IF DONE CORRECTLY REPAIR WIL BE SUBMITTED TO QUEUE. VISIT ANYDIRECTUNLOCK.COM AND CLICK REPAIR JOBS TAB AND YOU WILL SEE THE JOB#. (THIS PAGE CAN BE RE-FRESHED FROM TIME TO TIME TO SEE IF STATUS HAS CHANGED TO ACCEPTED) 
9. WHEN JOB IS ACCEPTED, CLEAR THE IMEI FIELD AND PRESS CHECK BUTTON. THE EXE WILL AUTO FILL IT WITH THE NEW IMEI GENERATED BY SERVER FOR THIS PHONE.
10. PRESS REPAIR BUTTON AGAIN TO COMPLETE. YOU WILL NOT BE CHARGED AGAIN FOR THE SAME PHONE. LET THE EXE COMPLETE THE PROCESS AND ITS DONE . IF THE PHONE AKS FOR AN UNLOCK CODE IT WILL BE 00000000



NOTE 9 / S9/S9+ STEPS FOR SPRINT / TMOBILE ONLY: (G960U / G960U1 / G965U / G965U1 / N960U / N960U1)

1. CLICK ON RESTART ADB SERVER BOX. WAIT 5-10 SECONDS AND THEN IN PORT DROP DOWN BOX SELECT CORRECT MODEM PORT. IN ADB DEVICE DROP DOWN BOX SELECT CORRECT ADB SN DEVICE
2. CLICK MSL UNLOCK TAB
3. SELECT NEW AT RIL
4. PRESS READ INFO. IF DONE CORRECTLY ALL INFORMATION ABOUT THE PHONE SHOULD APPEAR : MODEL# / UID / MSLADDRESS / MSLID / KEY ID / CPID ( IF ALL THESE DO NOT SHOW THAT MEANS NOT DONE CORRECTLY REDO AGAIN)
5. CLICK REPAIR TAB, SELECT CORRECT MODEL #. (MAKE SURE CORRECT MODEL IS SELECTED IF SELECT WRONG MODEL WRONG DATA WILL BE CREATED AND NO REFUND FOR THIS)
6. SELECT NEW AT RIL AND SELECT "SKIP UNLOCK(TMB, SPRINT)" BOX
7. IN THE IMEI FIELD ENTER A RANDOM IMEI CREATED FROM THE RANGE MENTIONED ABOVE AND CLICK REPAIR. ( DO NOT CLICK ANY OTHER BOX)
8. IF DONE CORRECTLY REPAIR WIL BE SUBMITTED TO QUEUE. VISIT ANYDIRECTUNLOCK.COM AND CLICK REPAIR JOBS TAB AND YOU WILL SEE THE JOB#. (THIS PAGE CAN BE RE-FRESHED FROM TIME TO TIME TO SEE IF STATUS HAS CHANGED TO ACCEPTED) 
9. WHEN JOB IS ACCEPTED, PRESS THE RESET MSL BUTTON. THIS WILL WIPE THE EFS FOR UNLOCK AND SET IMEI TO 000000000000000
10. CLEAR THE IMEI FIELD AND MAKE SURE "SKIP UNLOCK(TMB,SPRINT) BOX" IS SELECTED.
11. PRESS CHECK BUTTON, THIS WILL AUTOFILL THE IMEI FIELD WITH THE NEW IMEI GENERATED BY SERVER
12. PRESS REPAIR BUTTON AGAIN TO COMPLETE. YOU WILL NOT BE CHARGED AGAIN FOR THE SAME PHONE. LET THE EXE COMPLETE THE PROCESS AND ITS DONE .


THESE STEPS ARE FOR ALL QUALCOM S7 / S7 EDGE / S8 / S8+ / NOTE 8 ON STOCK FIRMWARE OR COMBINATION 7.0 / 7.1.1 / 8.0
** ANY QUALCOM PHONE IF WIPING EFS FOR REDUCDED CREDITS ON SOME SELECT MODELS MUST MAKE QCN BACKUP TO AVOID SIGNAL ISSUES
IF NO QCN BACK IS MADE WILL GET 2G/3G DATA ISSUES

1. SET DEBUG LEVEL TO HIGH.
2. CLICK ON RESTART ADB SERVER BOX. WAIT 5-10 SECONDS AND THEN IN PORT DROP DOWN BOX SELECT CORRECT MODEM PORT. IN ADB DEVICE DROP DOWN BOX SELECT CORRECT ADB SN DEVICE
3. TO RESET QUALCOM EFS, SELECT CORRECT MODEL AND CLICK RESET MSL BUTTON ON ANYCLIENT EXE.
4. CLICK MSL UNLOCK TAB AND SELECT NEW AT RIL
5. PRESS READ INFO. IF DONE CORRECTLY ALL INFORMATION ABOUT THE PHONE SHOULD APPEAR : MODEL# / UID / MSLADDRESS / MSLID / KEY ID / CPID. (NOTE SOME OLDER MODELS MSLID WILL NOT SHOW THIS IS FINE. IF ALL THESE DO NOT SHOW THAT MEANS NOT DONE CORRECTLY REDO AGAIN)
6. IF MSL RESET WAS USED, THE MSL ADDRESS MUST APPEAR AS 0000000000. (IF DOES NOT SHOW AS SUCH REPEAT STEPS 1-4 AGAIN, AND DO READ INFO AGAIN)
7. WRITE QCN AT THIS POINT BEFORE SUBMISSION. IF CHOOSE TO IGNORE YOU HAVE ALREADY BEEN WARNED ABOUT SIGNAL ISSUES
8. CLICK REPAIR TAB AND SELECT CORRECT MODEL #. (MAKE SURE CORRECT MODEL IS SELECTED IF SELECT WRONG MODEL WRONG DATA WILL BE CREATED AND NO REFUND FOR THIS)
9. SELECT NEW AT RIL AND ALSO SELECT "SKIP UNLOCK(TMB, SPRINT) BOX"
10. IN THE IMEI FIELD ENTER A RANDOM IMEI CREATED FROM THE RANGE MENTIONED ABOVE AND CLICK REPAIR. ( DO NOT CLICK ANY OTHER BOX)
11. IF DONE CORRECTLY REPAIR WIL BE SUBMITTED TO QUEUE. VISIT ANYDIRECTUNLOCK.COM AND CLICK REPAIR JOBS TAB AND YOU WILL SEE THE JOB#. (THIS PAGE CAN BE RE-FRESHED FROM TIME TO TIME TO SEE IF STATUS HAS CHANGED TO ACCEPTED) 
12. WHEN JOB IS ACCEPTED, CLEAR THE IMEI FIELD AND PRESS CHECK BUTTON. THE EXE WILL AUTO FILL IT WITH THE NEW IMEI GENERATED BY SERVER FOR THIS PHONE.
13. PRESS REPAIR BUTTON AGAIN TO COMPLETE. YOU WILL NOT BE CHARGED AGAIN FOR THE SAME PHONE. LET THE EXE COMPLETE THE PROCESS AND ITS DONE.

** USING RESET MSL RESET ONLY GAURENTEES DISCOUNT ON SOME SELECT MODELS. NOT ON ALL!
   IF STEPS ARE FOLLOWED CORRECTLY CHECK YOUR ACCOUNT ON ANYDIRECTUNLOCK.COM AFTER SUBMISSION AND CORRECT AMOUNT DEDUCTED WILL BE SHOWN.



OTHER QUALCOM PHONES SUCH AS:  A910F / A910FD / J510MN / J710MN ON STOCK FIRMWARE 7.0 / 7.1.1 / 8.0

1. CLICK ON RESTART ADB SERVER BOX. WAIT 5-10 SECONDS AND THEN IN PORT DROP DOWN BOX SELECT CORRECT MODEM PORT. IN ADB DEVICE DROP DOWN BOX SELECT CORRECT ADB SN DEVICE
2. CLICK MSL UNLOCK TAB AND SELECT NEW AT RIL
3. PRESS READ INFO. IF DONE CORRECTLY ALL INFORMATION ABOUT THE PHONE SHOULD APPEAR : MODEL# / UID / MSLADDRESS / MSLID / KEY ID / CPID. (NOTE SOME OLDER MODELS MSLID WILL NOT SHOW THIS IS FINE. IF ALL THESE DO NOT SHOW THAT MEANS NOT DONE CORRECTLY REDO AGAIN)
4. CLICK REPAIR TAB AND SELECT CORRECT MODEL #. (MAKE SURE CORRECT MODEL IS SELECTED IF SELECT WRONG MODEL WRONG DATA WILL BE CREATED AND NO REFUND FOR THIS)
5. SELECT NEW AT RIL ONLY.  **** DO NOT CLICK ON SKIP UNLOCK(TMB,SPRINT) BOX
6. IN THE IMEI FIELD ENTER A RANDOM IMEI CREATED FROM THE RANGE MENTIONED ABOVE AND CLICK REPAIR. ( DO NOT CLICK ANY OTHER BOX)
7. IF DONE CORRECTLY REPAIR WIL BE SUBMITTED TO QUEUE. VISIT ANYDIRECTUNLOCK.COM AND CLICK REPAIR JOBS TAB AND YOU WILL SEE THE JOB#. (THIS PAGE CAN BE RE-FRESHED FROM TIME TO TIME TO SEE IF STATUS HAS CHANGED TO ACCEPTED) 
8. WHEN JOB IS ACCEPTED, CLEAR THE IMEI FIELD AND PRESS CHECK BUTTON. THE EXE WILL AUTO FILL IT WITH THE NEW IMEI GENERATED BY SERVER FOR THIS PHONE.
9. PRESS REPAIR BUTTON AGAIN TO COMPLETE. YOU WILL NOT BE CHARGED AGAIN FOR THE SAME PHONE. LET THE EXE COMPLETE THE PROCESS AND ITS DONE. IF PHONE PROMPTS FOR AN UNLOCK CODE PLEASE ENTER: 00000000.


EXYNOS MODELS:

S7 /S7 EDGE (G930F / G930FD / G930W8 / G935W8) ON COMINATION FIRMWARE

1. FLASH COMBINATION MODEM ONLY TO PHONE AND SET DEBUG TO HIGH.
2. RESET MSL USING "MSL RESET / UNLOCK (MODEM)BUTTON ON IGTOOL
3. CLICK ON RESTART ADB SERVER BOX. WAIT 5-10 SECONDS AND THEN IN PORT DROP DOWN BOX SELECT CORRECT MODEM PORT. IN ADB DEVICE DROP DOWN BOX SELECT CORRECT ADB SN DEVICE
4. CLICK MSL UNLOCK TAB AND SELECT OLD AT RIL. 
5. PRESS READ INFO. IF DONE CORRECTLY ALL INFORMATION ABOUT THE PHONE SHOULD APPEAR : MODEL# / UID / MSLADDRESS / MSLID / KEY ID / CPID =  NEEDMSL AUTH. (NOTE SOME OLDER MODELS MSLID WILL NOT SHOW THIS IS FINE. IF ALL THESE DO NOT SHOW THAT MEANS NOT DONE CORRECTLY REDO AGAIN)
6. SINCE MSL WAS RESET, THE MSL ADDRESS MUST APPEAR AS 0000000000. (IF DOES NOT SHOW AS SUCH, RESTART THE PHONE AND REPEAT STEPS 2-5 AGAIN, AND DO READ INFO AGAIN)
7. CLICK REPAIR TAB AND SELECT CORRECT MODEL #. (MAKE SURE CORRECT MODEL IS SELECTED IF SELECT WRONG MODEL WRONG DATA WILL BE CREATED AND NO REFUND FOR THIS)
8. SELECT OLD AT RIL AND ALSO SELECT SKIP UNLOCK(TMB/SPRINT) BOX. 
** IF DRK DAMAGED CLICK REPAIR DRK BOX ASWELL 

9. IN THE IMEI FIELD ENTER A RANDOM IMEI CREATED FROM THE RANGE MENTIONED ABOVE AND CLICK REPAIR. ( DO NOT CLICK ANY OTHER BOX) 
**  IF PHONE IS DUAL SIM MUST ENTER DIFFERENT RANDOM IMEI FOR IMEI1 AND IMEI2. 
*** ALWAYS KEEP RECORDS OF THE TEMPORARY IMEI YOU SUBMIT.

10. IF DONE CORRECTLY REPAIR WIL BE SUBMITTED TO QUEUE. VISIT ANYDIRECTUNLOCK.COM AND CLICK REPAIR JOBS TAB AND YOU WILL SEE THE JOB#. (THIS PAGE CAN BE RE-FRESHED FROM TIME TO TIME TO SEE IF STATUS HAS CHANGED TO ACCEPTED) 
11. WHEN JOB IS ACCEPTED, CLEAR THE IMEI FIELD AND PRESS CHECK BUTTON. THE EXE WILL AUTO FILL IT WITH THE NEW IMEI GENERATED BY SERVER FOR THIS PHONE.
12. PRESS REPAIR BUTTON AGAIN TO COMPLETE. YOU WILL NOT BE CHARGED AGAIN FOR THE SAME PHONE. LET THE EXE COMPLETE THE PROCESS AND ITS DONE.
13. FLASH BACK STOCK FIRMWARE TO COMPLETE

** USING RESET MSL RESET ONLY GAURENTEES DISCOUNT ON SOME SELECT MODELS. NOT ON ALL!
   IF STEPS ARE FOLLOWED CORRECTLY CHECK YOUR ACCOUNT ON ANYDIRECTUNLOCK.COM AFTER SUBMISSION AND CORRECT AMOUNT DEDUCTED WILL BE SHOWN.



S7 /S7 EDGE (G930F / G930FD / G930W8 / G935W8) ON STOCK FIRMWARE (7.0 / 8.0)

1. SET DEBUG TO HIGH.
2. FLASH COMBINATION MODEM AND RESET MSL USING "MSL RESET / UNLOCK (MODEM)BUTTON ON IGTOOL
3. CLICK ON RESTART ADB SERVER BOX. WAIT 5-10 SECONDS AND THEN IN PORT DROP DOWN BOX SELECT CORRECT MODEM PORT. IN ADB DEVICE DROP DOWN BOX SELECT CORRECT ADB SN DEVICE
4. CLICK MSL UNLOCK TAB AND SELECT NEW AT RIL. 
5. PRESS READ INFO. IF DONE CORRECTLY ALL INFORMATION ABOUT THE PHONE SHOULD APPEAR : MODEL# / UID / MSLADDRESS / MSLID / KEY ID / CPID =  NEEDMSL AUTH. (NOTE SOME OLDER MODELS MSLID WILL NOT SHOW THIS IS FINE. IF ALL THESE DO NOT SHOW THAT MEANS NOT DONE CORRECTLY REDO AGAIN)
6. SINCE MSL WAS RESET, THE MSL ADDRESS MUST APPEAR AS 0000000000. (IF DOES NOT SHOW AS SUCH, RESTART THE PHONE AND REPEAT STEPS 2-5 AGAIN, AND DO READ INFO AGAIN)
7. CLICK REPAIR TAB AND SELECT CORRECT MODEL #. (MAKE SURE CORRECT MODEL IS SELECTED IF SELECT WRONG MODEL WRONG DATA WILL BE CREATED AND NO REFUND FOR THIS)
8. SELECT NEW AT RIL ONLY. DO NOT SELECT SKIP UNLOCK(TMB/SPRINT) BOX. 
9. IN THE IMEI FIELD ENTER A RANDOM IMEI CREATED FROM THE RANGE MENTIONED ABOVE AND CLICK REPAIR. (DO NOT CLICK ANY OTHER BOX) 
**  IF PHONE IS DUAL SIM MUST ENTER DIFFERENT RANDOM IMEI FOR IMEI1 AND IMEI2. 
*** ALWAYS KEEP RECORDS OF THE TEMPORARY IMEI YOU SUBMIT.

10. IF DONE CORRECTLY REPAIR WIL BE SUBMITTED TO QUEUE. VISIT ANYDIRECTUNLOCK.COM AND CLICK REPAIR JOBS TAB AND YOU WILL SEE THE JOB#. (THIS PAGE CAN BE RE-FRESHED FROM TIME TO TIME TO SEE IF STATUS HAS CHANGED TO ACCEPTED) 
11. WHEN JOB IS ACCEPTED, CLEAR THE IMEI FIELD AND PRESS CHECK BUTTON. THE EXE WILL AUTO FILL IT WITH THE NEW IMEI GENERATED BY SERVER FOR THIS PHONE.
12. PRESS REPAIR BUTTON AGAIN TO COMPLETE. YOU WILL NOT BE CHARGED AGAIN FOR THE SAME PHONE. LET THE EXE COMPLETE THE PROCESS AND ITS DONE.
13. FLASH BACK STOCK MODEM TO COMPLETE.
14. IF PHONE ASKS FOR UNLOCK CODE IT'S 00000000

** USING RESET MSL RESET ONLY GAURENTEES DISCOUNT ON SOME SELECT MODELS. NOT ON ALL!
   IF STEPS ARE FOLLOWED CORRECTLY CHECK YOUR ACCOUNT ON ANYDIRECTUNLOCK.COM AFTER SUBMISSION AND CORRECT AMOUNT DEDUCTED WILL BE SHOWN.





A520F / A520W / A520FD / A720F / A720FD / G570M / J327A / J327AZ / J327W / J327T / J327T1 / J727A / J727AZ / J727P / J727V / J727T / J727T1 / OR OLDER EXYNOS

1. FLASH COMBINATION FIRMWARE TO PHONE AND SET DEBUG TO HIGH. 
2. RESET MSL USING NEW EXYNOS MSL RESET ON IGTOOL
3. CLICK ON RESTART ADB SERVER BOX. WAIT 5-10 SECONDS AND THEN IN PORT DROP DOWN BOX SELECT CORRECT MODEM PORT. IN ADB DEVICE DROP DOWN BOX SELECT CORRECT ADB SN DEVICE
4. CLICK MSL UNLOCK TAB AND SELECT OLD AT RIL
5. PRESS READ INFO. IF DONE CORRECTLY ALL INFORMATION ABOUT THE PHONE SHOULD APPEAR : MODEL# / UID / MSLADDRESS / MSLID / KEY ID / CPID =  NEEDMSL AUTH. (NOTE SOME OLDER MODELS MSLID WILL NOT SHOW THIS IS FINE. IF ALL THESE DO NOT SHOW THAT MEANS NOT DONE CORRECTLY REDO AGAIN)
6. SINCE MSL WAS RESET, THE MSL ADDRESS MUST APPEAR AS 0000000000. (IF DOES NOT SHOW AS SUCH, RESTART THE PHONE AND REPEAT STEPS 2-5 AGAIN, AND DO READ INFO AGAIN)
7. CLICK REPAIR TAB AND SELECT CORRECT MODEL #. (MAKE SURE CORRECT MODEL IS SELECTED IF SELECT WRONG MODEL WRONG DATA WILL BE CREATED AND NO REFUND FOR THIS)
8. SELECT OLD AT RIL AND ALSO SELECT SKIP UNLOCK(TMB/SPRINT) BOX.
** IF DRK DAMAGED CLICK REPAIR DRK BOX ASWELL 

9. IN THE IMEI FIELD ENTER A RANDOM IMEI CREATED FROM THE RANGE MENTIONED ABOVE AND CLICK REPAIR. ( DO NOT CLICK ANY OTHER BOX) 
**  IF PHONE IS DUAL SIM MUST ENTER DIFFERENT RANDOM IMEI FOR IMEI1 AND IMEI2. 
*** ALWAYS KEEP RECORDS OF THE TEMPORARY IMEI YOU SUBMIT.

10. IF DONE CORRECTLY REPAIR WIL BE SUBMITTED TO QUEUE. VISIT ANYDIRECTUNLOCK.COM AND CLICK REPAIR JOBS TAB AND YOU WILL SEE THE JOB#. (THIS PAGE CAN BE RE-FRESHED FROM TIME TO TIME TO SEE IF STATUS HAS CHANGED TO ACCEPTED) 
11. WHEN JOB IS ACCEPTED, CLEAR THE IMEI FIELD AND PRESS CHECK BUTTON. THE EXE WILL AUTO FILL IT WITH THE NEW IMEI GENERATED BY SERVER FOR THIS PHONE.
    IF THE PHONE WAS RESTARTED AFTER SUBMISSION OR INTBETWEEN MUST COMPLETE AGAIN STEPS 2-6 BEFORE DOING STEP 11.
12. PRESS REPAIR BUTTON AGAIN TO COMPLETE. YOU WILL NOT BE CHARGED AGAIN FOR THE SAME PHONE. LET THE EXE COMPLETE THE PROCESS AND ITS DONE.

** USING RESET MSL RESET ONLY GAURENTEES DISCOUNT ON SOME SELECT MODELS. NOT ON ALL!
   IF STEPS ARE FOLLOWED CORRECTLY CHECK YOUR ACCOUNT ON ANYDIRECTUNLOCK.COM AFTER SUBMISSION AND CORRECT AMOUNT DEDUCTED WILL BE SHOWN.



A530F / A530FD / A530W / A730F / A730FD / J730G 

1. FLASH COMBINATION FIRMWARE TO PHONE AND SET DEBUG TO HIGH
2. RESET MSL USING NEW EXYNOS MSL RESET ON IGTOOL
3. USE SECRIL BYPASS ON IGTOOL
4. CLICK ON RESTART ADB SERVER BOX. WAIT 5-10 SECONDS AND THEN IN PORT DROP DOWN BOX SELECT CORRECT MODEM PORT. IN ADB DEVICE DROP DOWN BOX SELECT CORRECT ADB SN DEVICE
5. CLICK MSL UNLOCK TAB AND SELECT OLD AT RIL
6. PRESS READ INFO. IF DONE CORRECTLY ALL INFORMATION ABOUT THE PHONE SHOULD APPEAR : MODEL# / UID / MSLADDRESS / MSLID / KEY ID / CPID =  NEEDMSL AUTH. (NOTE SOME OLDER MODELS MSLID WILL NOT SHOW THIS IS FINE. IF ALL THESE DO NOT SHOW THAT MEANS NOT DONE CORRECTLY REDO AGAIN)
7. SINCE MSL WAS RESET, THE MSL ADDRESS MUST APPEAR AS 0000000000. (IF DOES NOT SHOW AS SUCH, RESTART THE PHONE AND REPEAT STEPS 2-5 AGAIN, AND DO READ INFO AGAIN)
8. CLICK REPAIR TAB AND SELECT CORRECT MODEL #. (MAKE SURE CORRECT MODEL IS SELECTED IF SELECT WRONG MODEL WRONG DATA WILL BE CREATED AND NO REFUND FOR THIS)
9. SELECT OLD AT RIL AND ALSO SELECT SKIP UNLOCK(TMB/SPRINT) BOX.
** IF DRK DAMAGED CLICK REPAIR DRK BOX ASWELL
 
10. IN THE IMEI FIELD ENTER A RANDOM IMEI CREATED FROM THE RANGE MENTIONED ABOVE AND CLICK REPAIR. ( DO NOT CLICK ANY OTHER BOX) 
**  IF PHONE IS DUAL SIM MUST ENTER DIFFERENT RANDOM IMEI FOR IMEI1 AND IMEI2. 
*** ALWAYS KEEP RECORDS OF THE TEMPORARY IMEI YOU SUBMIT.

11. IF DONE CORRECTLY REPAIR WIL BE SUBMITTED TO QUEUE. VISIT ANYDIRECTUNLOCK.COM AND CLICK REPAIR JOBS TAB AND YOU WILL SEE THE JOB#. (THIS PAGE CAN BE RE-FRESHED FROM TIME TO TIME TO SEE IF STATUS HAS CHANGED TO ACCEPTED) 
12. WHEN JOB IS ACCEPTED, CLEAR THE IMEI FIELD AND PRESS CHECK BUTTON. THE EXE WILL AUTO FILL IT WITH THE NEW IMEI GENERATED BY SERVER FOR THIS PHONE.
    IF THE PHONE WAS RESTARTED AFTER SUBMISSION OR INTBETWEEN MUST COMPLETE AGAIN STEPS 2-7 BEFORE DOING STEP 12.
13. PRESS REPAIR BUTTON AGAIN TO COMPLETE. YOU WILL NOT BE CHARGED AGAIN FOR THE SAME PHONE. LET THE EXE COMPLETE THE PROCESS AND ITS DONE.

** USING RESET MSL RESET ONLY GAURENTEES DISCOUNT ON SOME SELECT MODELS. NOT ON ALL!
   IF STEPS ARE FOLLOWED CORRECTLY CHECK YOUR ACCOUNT ON ANYDIRECTUNLOCK.COM AFTER SUBMISSION AND CORRECT AMOUNT DEDUCTED WILL BE SHOWN.



STEP FOR A530F / A530FD / A530W / A730F / A730FD / J730G / J330G / J600G OR ANY NEWER EXYNOS ON STOCK FIRMWARE WITH NO COMBINATION FLASHED.
** WHEN ON STOCK FIRMWARE WITHOUT MSL RESET, IT A 2-STEP PROCESS SO MUST SAVE THE TEMPORARY IMEI SUBMITTED TO AVOID DELAYS.


1. SET DEBUG LEVEL TO HIGH.
2. CLICK ON RESTART ADB SERVER BOX. WAIT 5-10 SECONDS AND THEN IN PORT DROP DOWN BOX SELECT CORRECT MODEM PORT. IN ADB DEVICE DROP DOWN BOX SELECT CORRECT ADB SN DEVICE
3. CLICK MSL UNLOCK TAB AND SELECT NEW AT RIL
4. PRESS READ INFO. IF DONE CORRECTLY ALL INFORMATION ABOUT THE PHONE SHOULD APPEAR : MODEL# / UID / MSLADDRESS / MSLID / KEY ID / CPID =  NEEDMSL AUTH. (NOTE SOME OLDER MODELS MSLID WILL NOT SHOW THIS IS FINE. IF ALL THESE DO NOT SHOW THAT MEANS NOT DONE CORRECTLY REDO AGAIN)
5. CLICK REPAIR TAB AND SELECT CORRECT MODEL #. (MAKE SURE CORRECT MODEL IS SELECTED IF SELECT WRONG MODEL WRONG DATA WILL BE CREATED AND NO REFUND FOR THIS)
6. SELECT NEW AT RIL ONLY. DO NOT SELECT "SKIP UNLOCK(TMB, SPRINT) BOX"
7. IN THE IMEI FIELD ENTER A RANDOM IMEI CREATED FROM THE RANGE MENTIONED ABOVE AND CLICK REPAIR. ( DO NOT CLICK ANY OTHER BOX) 
**  IF PHONE IS DUAL SIM MUST ENTER DIFFERENT RANDOM IMEI FOR IMEI1 AND IMEI2. 
*** YOU MUST SAVE THIS TEMPORARY IMEI AS IT WILL BE REQUIRED AGAIN 

8. IF DONE CORRECTLY REPAIR WIL BE SUBMITTED TO QUEUE. VISIT ANYDIRECTUNLOCK.COM AND CLICK REPAIR JOBS TAB AND YOU WILL SEE THE JOB#. (THIS PAGE CAN BE RE-FRESHED FROM TIME TO TIME TO SEE IF STATUS HAS CHANGED TO LOGGED) 
9. WHEN JOB STATUS IS CHANGED TO LOGGED, RE-ENTER AGAIN THE SAME IMEI SUBMITTED IN STEP 7 AND PRESS REPAIR BUTTON AGAIN. THE ORDER WILL GO BACK TO QUEUE
*** MUST CONFIRM AND MAKE SURE ITS THE SAME IMEI AS IN STEP7. FAILURE TO DO SO WILL RESULT IN A DUPLICATE ORDER AND WILL NOT BE SUBMITTED.
*** IF DO NOT HAVE THAT TEMPORARY IMEI SAVED MUST CONTACT ME.

10. WHEN JOB IS ACCEPTED, CLEAR THE IMEI FIELD AND PRESS CHECK BUTTON. THE EXE WILL AUTO FILL IT WITH THE NEW IMEI GENERATED BY SERVER FOR THIS PHONE.
11. PRESS REPAIR BUTTON AGAIN TO COMPLETE. YOU WILL NOT BE CHARGED AGAIN FOR THE SAME PHONE. LET THE EXE COMPLETE THE PROCESS AND ITS DONE.



NOTE 8 N950F / N950FD / N950N AND  S8/S8+ EXYNOS G950F/G950FD G955F/G955FD

1. FLASH COMBINATION FIRMWARE TO PHONE AND SET DEBUG TO HIGH.
2. RESET MSL USING NEW EXYNOS MSL RESET ON IGTOOL
3. CLICK ON RESTART ADB SERVER BOX. WAIT 5-10 SECONDS AND THEN IN PORT DROP DOWN BOX SELECT CORRECT MODEM PORT. IN ADB DEVICE DROP DOWN BOX SELECT CORRECT ADB SN DEVICE
4. CLICK MSL UNLOCK TAB AND SELECT OLD AT RIL
5. PRESS READ INFO. IF DONE CORRECTLY ALL INFORMATION ABOUT THE PHONE SHOULD APPEAR : MODEL# / UID / MSLADDRESS / MSLID / KEY ID / CPID= NEED MSLAUTH. (NOTE SOME OLDER MODELS MSLID WILL NOT SHOW THIS IS FINE. IF ALL THESE DO NOT SHOW THAT MEANS NOT DONE CORRECTLY REDO AGAIN)
6. SINCE MSL WAS RESET, THE MSL ADDRESS MUST APPEAR AS 0000000000. (IF DOES NOT SHOW AS SUCH, RESTART THE PHONE AND REPEAT STEPS 2-5 AGAIN, AND DO READ INFO AGAIN)
7. CLICK REPAIR TAB AND SELECT CORRECT MODEL #. (MAKE SURE CORRECT MODEL IS SELECTED IF SELECT WRONG MODEL WRONG DATA WILL BE CREATED AND NO REFUND FOR THIS)
8. SELECT OLD AT RIL AND ALSO SELECT SKIP UNLOCK(TMB/SPRINT) BOX.
9. IN THE IMEI FIELD ENTER A RANDOM IMEI CREATED FROM THE RANGE MENTIONED ABOVE AND CLICK REPAIR. ( DO NOT CLICK ANY OTHER BOX) 
**  IF PHONE IS DUAL SIM MUST ENTER DIFFERENT RANDOM IMEI FOR IMEI1 AND IMEI2. 
*** ALWAYS KEEP RECORDS OF THE TEMPORARY IMEI YOU SUBMIT.

10. IF DONE CORRECTLY REPAIR WIL BE SUBMITTED TO QUEUE. VISIT ANYDIRECTUNLOCK.COM AND CLICK REPAIR JOBS TAB AND YOU WILL SEE THE JOB#. (THIS PAGE CAN BE RE-FRESHED FROM TIME TO TIME TO SEE IF STATUS HAS CHANGED TO ACCEPTED) 
11. WHEN JOB IS ACCEPTED, CLEAR THE IMEI FIELD AND PRESS CHECK BUTTON. THE EXE WILL AUTO FILL IT WITH THE NEW IMEI GENERATED BY SERVER FOR THIS PHONE.
12. PRESS REPAIR BUTTON AGAIN TO COMPLETE. YOU WILL NOT BE CHARGED AGAIN FOR THE SAME PHONE. LET THE EXE COMPLETE THE PROCESS AND ITS DONE. IF PHONE DOES NOT REBOOT BYSELF THEN REBOOT MANUALLY TO COMPLETE.

** USING RESET MSL RESET ONLY GAURENTEES DISCOUNT WHEN STEPS ARE FOLLOWED IN CORRECT ORDER!
   IF STEPS ARE FOLLOWED CORRECTLY CHECK YOUR ACCOUNT ON ANYDIRECTUNLOCK.COM AFTER SUBMISSION AND CORRECT AMOUNT DEDUCTED WILL BE SHOWN.


MTK MODELS SUCH AS G532M : ( REQUIRE ENG ROOT AND KNOX 0) 

1. FLASH ENG ROOT TO PHONE AND SET DEBUG TO HIGH
2. IN MTK TAB OF IGTOOL, CLICK RESET MSL BUTTON.
3. CLICK ON RESTART ADB SERVER BOX. WAIT 5-10 SECONDS AND THEN IN PORT DROP DOWN BOX SELECT CORRECT MODEM PORT. IN ADB DEVICE DROP DOWN BOX SELECT CORRECT ADB SN DEVICE
4. CLICK MSL UNLOCK TAB AND SELECT OLD AT RIL
5. PRESS READ INFO. IF DONE CORRECTLY ALL INFORMATION ABOUT THE PHONE SHOULD APPEAR : MODEL# / UID / MSLADDRESS / MSLID / KEY ID / CPID =  NEEDMSL AUTH. (NOTE SOME OLDER MODELS MSLID WILL NOT SHOW THIS IS FINE. IF ALL THESE DO NOT SHOW THAT MEANS NOT DONE CORRECTLY REDO AGAIN)
6. SINCE MSL WAS RESET, THE MSL ADDRESS MUST APPEAR AS 0000000000. (IF DOES NOT SHOW AS SUCH, RESTART THE PHONE AND REPEAT STEPS 2-5 AGAIN, AND DO READ INFO AGAIN)
7. CLICK REPAIR TAB AND SELECT CORRECT MODEL #. (MAKE SURE CORRECT MODEL IS SELECTED IF SELECT WRONG MODEL WRONG DATA WILL BE CREATED AND NO REFUND FOR THIS)
8. SELECT OLD AT RIL AND ALSO SELECT SKIP UNLOCK(TMB/SPRINT) BOX.
 

9. IN THE IMEI FIELD ENTER A RANDOM IMEI CREATED FROM THE RANGE MENTIONED ABOVE AND CLICK REPAIR. ( DO NOT CLICK ANY OTHER BOX) 
**  IF PHONE IS DUAL SIM MUST ENTER DIFFERENT RANDOM IMEI FOR IMEI1 AND IMEI2. 
*** ALWAYS KEEP RECORDS OF THE TEMPORARY IMEI YOU SUBMIT.

10. IF DONE CORRECTLY REPAIR WIL BE SUBMITTED TO QUEUE. VISIT ANYDIRECTUNLOCK.COM AND CLICK REPAIR JOBS TAB AND YOU WILL SEE THE JOB#. (THIS PAGE CAN BE RE-FRESHED FROM TIME TO TIME TO SEE IF STATUS HAS CHANGED TO ACCEPTED) 
11. WHEN JOB IS ACCEPTED, CLEAR THE IMEI FIELD AND PRESS CHECK BUTTON. THE EXE WILL AUTO FILL IT WITH THE NEW IMEI GENERATED BY SERVER FOR THIS PHONE.
12. PRESS REPAIR BUTTON AGAIN TO COMPLETE. YOU WILL NOT BE CHARGED AGAIN FOR THE SAME PHONE. LET THE EXE COMPLETE THE PROCESS AND ITS DONE.

** USING RESET MSL RESET ONLY GAURENTEES DISCOUNT ON SOME SELECT MODELS. NOT ON ALL!
   IF STEPS ARE FOLLOWED CORRECTLY CHECK YOUR ACCOUNT ON ANYDIRECTUNLOCK.COM AFTER SUBMISSION AND CORRECT AMOUNT DEDUCTED WILL BE SHOWN.